Products

They are used in pumps operating in hot water network installations and in condensate pumps. Developed construction solutions cover the whole range of pumps used in Polish power and heat generating plants.

It is a general purpose mechanical seal with a wide range of applications. It is designed to operate with cold and hot water, oils, fuels, not very aggressive chemicals and other liquids contaminated with solid particles.

It is a general purpose mechanical seal with a wide range of applications. It is designed to work with media containing abrasive particles (e.g., ash, ores, cement, sludge and suspended matter) and chemicals harmful to the environment. BED seal requires installation of a system of buffer liquid (acc. to API Plan 52, 55) or barrier liquid (API Plan 53a, 53b, 53c, 54). Maximum pressure of barrier liquid: 2.0 MPa.

The BEH is a general purpose mechanical seal with a wide range of applications. It is designed to work with media containing abrasive particles and with environmentally hazardous chemicals. BEH seal requires use of external quench liquid installation.

The BEQ is a general purpose mechanical seal with a wide range of applications. It is designed to operate with cold and hot water, oils, fuels, not very aggressive chemicals and other liquids contaminated with solid particles. Compact construction enables direct application in chambers with braided packing. BEQ seal can be connected to an outer quenching system acc. to API Plan 11/61 or 32/61.

It is a general purpose mechanical seal designed especially for pump installations for liquefied hydrocarbons of low density, and high pressures, occurring in refineries, in petrochemical and chemical industries. This mechanical seal is designed for clean media (without mechanical inclusions and abrasives): some organic acids, higher hydrocarbons, propane-butane, ethanol, acetone, cumene, unsaturated aliphatic hydrocarbons (olefins CnH2n).

It is a general purpose mechanical seal designed especially for pump installations for liquefied hydrocarbons of low density, and high pressures, occurring in refineries, in petrochemical and chemical industries. This mechanical seal is designed for the following media: propane-butane, ethanol, acetone, cumene, unsaturated aliphatic hydrocarbons (olefins CnH2n) of high purity, without mechanical inclusions and abrasive contamination. BPD seal can also be successfully used for clean chemicals, some organic acids and higher hydrocarbons. BPD seals eliminate harmful emissions of process medium to the environment by using a tandem seal arrangement according to API 682 type 2 with cooling-separating liquid installation and atmospheric tank.

The BU is a single mechanical seal used for media contaminated with particulate solids, especially, e.g., crude oil and polluted hydrocarbons. BU seal requires auxiliary installations acc. to API 682 (EN ISO 21049), Plan: 11/61, 11/62, 12/61, 12/62, 13/61, 13/62.

It is a double mechanical seal used for media contaminated with particulate solids, especially, e.g., crude oil and polluted hydrocarbons. BUV seal requires auxiliary installations acc. to API 682 (EN ISO 21049), Plan: 11/52, 11/53A, 12/52, 12/53A, 13/52, 13/53A.

The E1 mechanical seal is used in petrochemical, chemical and pharmaceutical industries. It is designed to operate with hot oils, fuels and other hydrocarbons, liquid gases and other media containing small amounts of abrasives.

The E2 mechanical seal is used in petrochemical, chemical and pharmaceutical industries. It is designed to operate with hot oils, fuels and other hydrocarbons, liquid gases and other media containing small amounts of abrasives.

The EP is a seal designed to work with hydrocarbons appearing in the petroleum refining processes. It is designed acc. to the recommendations of ISO 21049 Std. (API 682). EP seal is adapted to operation in the systems acc. to AP 682 standards, configuration: from the process medium side acc. to Plan 11, 12,.13, 23, 31 or 32; whereas from the atmosphere side Plan 61, 62 or 65.